logo

MODULAR
PANEL WATER
TANKS

SUNNIK HDPE** LINED HDG*

SUNNIK HDPE** LINED HDG*

sunnik-the-official-brand-of-steelworks-malaysia-projects-hdpe-lining-system-projects-thumbnail-01sunnik-the-official-brand-of-steelworks-malaysia-projects-hdpe-lining-system-projects-thumbnail-02sunnik-the-official-brand-of-steelworks-malaysia-projects-hdpe-lining-system-projects-thumbnail-03sunnik-the-official-brand-of-steelworks-malaysia-projects-hdpe-lining-system-projects-thumbnail-04

Manufacturing Specifications

General Applications HDPE (High Density Polyethylene) Geomembrane lined HDG (Hot Dipped Galvanized) Mild Steel Sectional Tank Panel is a high corrosive water, food processing plant or liquid containment in normal environment
Standards ‘Sunnik’ HDPE Lined HDG Sectional Panels Tank (rectangular) constructed with hydraulically pressed flanged panel conform to British Standard 1564:1949 & 1975 and latter HDPE lined heated onto internal side of panels.
Materials The mild steel used in the manufacturer of the plates, stays, cleats, and pads for installation confirm to the requirements of B.S.4360 grade 43A.
Tank Panels Tank panels of 4′ x 4′ or 1m x 1m square are hot dip galvanized to ISO 1461:1999
Panel HDPE Lined HDG Sectional Panels Tank covers are hydraulically pressed 1.5mm thk. x 1m x 1m square.
Stays and Cleats The stays and cleats shall be of stainless steel*
Bolts and Nuts Bolts nuts and washer that are in contacted with water shall be stainless steel* whereas those not in contacted with water shall be of hot dipped galvanized type.
HDPE Lining 1.0mm thick HDPE (High density polyethylene) geomembrane heat lined onto panel’s internal surface. All seams shall be homogeneous welded using hot fusion welding.
Ladders The internal ladder shall be stainless steel* or Aluminium type while the external ladder shall be either galvanized or aluminium type.
Level Indicator Galvanized indirect reading indicator (ruler type) shall be provided on request.
B.S. 1564: 1975 (Revised) For cold liquid with density of 1.0 and having temperature not exceeding 38°C.
Tanks 4ft Height: Bottom, sides and ends. 5mm
Tanks 8ft Height: Bottom, sides and ends. 5mm
Tanks 12ft Height: Bottom, sides and ends. 5mm
Tanks 16ft Height: Bottom and first tiers of sides and ends. 6mm
Second, third and top tiers of sides & ends 5mm

* HOT DIPPED GALVANISED
** HIGH DENSITY POLYETHYLENE GEOMEMBRANE LINING

Notes:

  • Compliance with American Society for Testing and Materials (ASTM)*
  • Manufacturing specifications are subject to change without prior notice.
  • Manufacturing specifications can be customized but subject to manufacturer’s approval and safety standards.
  • It is recommended all HDPE Lined HDG Sectional Panels Tank shall be installed by our approved installers only

logo

MODULAR
PANEL WATER
TANKS

back to top